95689 Thunder Shot Mk.II Asia Problem 2025 (MS Chassis)
To commemorate the Tamiya Mini 4WD Asia Problem 2025 (TMAC) which is deliberate in Taiwan in early summer time 2025, this limited-edition launch depicts our widespread Merchandise 18620 Thunder Shot Mk.II. It includes a new coloration physique (gentle smoke), MS chassis (gentle grey) with part elements (inexperienced), newly designed clear stickers and new packaging, which makes the automobile stand out!
• Mini 4WD mannequin meeting package. Size: 152mm, width: 92mm, top: 40mm.
• The MS chassis and A elements are molded in gentle grey and inexperienced plastic, respectively.
• The favored Thunder Shot Mk.II physique is molded in gentle smoke plastic.
• Gloss-green plated, fin-type wheels are paired with black tremendous exhausting low-profile tires which have “TAMIYA MINI 4WD / ASIA CHALLENGE / SUPER HARD” lettering print in white.
• Clear stickers characteristic a contemporary design which has Asia Problem lettering and its 12 months.
• Features a Kind 130 motor. The mannequin includes a 3.5:1 gear ratio.
• Two AA batteries are required (offered individually).
• A variety of Grade-Up Elements is accessible individually to customise your automobile.
19024 Enjoyable-Vroom (EZ Chassis)
This meeting package is a beginner-friendly platform – referred to as “Path Mini 4WD” – with the newly designed EZ chassis – into the Mini 4WD mannequin household. The package ensures ease of meeting with a restricted variety of elements and doesn’t require Mini 4WD monitor programs and high-level tune-ups. The primary mannequin includes a physique design impressed by full- measurement 4WD buggies which give the mannequin a strong picture.
• The brand new EZ chassis options ease of meeting, and it’s molded in tinted smoke-color plastic to make the within construction seen.
• A central double-shaft motor (Kind 130 motor) is used like Mini 4WD PRO kits.
• Cement and screws usually are not required. Facet cutters and tweezers are the one required instruments.
• Change the battery from the chassis underside.
• Utilizing just one AA battery (offered individually), the mannequin strikes at strolling tempo (1m in about 3.6 seconds).
• The mannequin includes a 50:1 gear ratio.
15545 26mm Tires/Carbon Wheels Laborious/Sm Dia/Low Profile Grey
Use this tire and wheel mixture to fantastic tune your Mini 4WD machine to the monitor!
• Laborious Small Dia. Low-Profile Tires (26mm/Grey) x4
• Carbon Wheels (Dish, for Tremendous X & XX Chassis) x4
• Laborious small diameter low-profile tires characteristic a decrease grip and are molded in grey.
• Y-spoke carbon fiber strengthened wheels retain form extra successfully and cut back automobile bouncing.
• Laborious tire compound.
• Appropriate with Mini 4WD PRO and Mini 4WD vehicles with small diameter tires. (Please be aware that some chassis and our bodies could require modification.)
15546 31mm Tires/Carbon Wheels Lg Dia/Low Friction/Arched
These are Mini 4WD non-compulsory tires fitted on V-Spoke wheels. Use them to tune your Mini 4WD machine to the racetrack.
• Giant Dia. Low Friction Arched Tires (31mm) x4
• Carbon Wheels (V spoke) x4.
• Low friction tires characteristic a decrease grip attribute on monitor. Match them to entrance for easy cornering, or rear to shorten jumps.
• V spoke carbon fiber strengthened wheels retain form extra successfully and cut back automobile bouncing.
• Laborious tire compound.
• Appropriate with Mini 4WD PRO and Mini 4WD vehicles with giant diameter tires. (Please be aware that some chassis and our bodies could require modification.)
15547 Spike Tire/Wheel Set EZ Chassis
This spike tire and wheel set is to be used on the brand new EZ chassis (used on Merchandise 19024 Enjoyable-Vroom). The set can be utilized to spice up the uphill efficiency of the EZ-Chassis when transversing obstacles.
• Spike tires (black, elastomer) x4.
• Wheels (gun metallic, polypropylene) x4.
• Devoted wheels that are suitable with hex shafts of Path Mini 4WD package. (Not suitable with hex shafts of Mini 4WD race vehicles.)
• These tires increase efficiency on slopes and tough terrain.
• Appropriate with EZ chassis vehicles. (Please be aware that some our bodies could require modification.)
95683 HG Alum Ball-Race Rollers LW 13mm Tapered (Ringless)
These HG 13mm Tapered Aluminum Ball-Race Rollers (Ringless) characteristic an progressive design that makes use of holes to limit additional weight. Their tapered form helps the automobile get again on the course when it goes over course.
• Light-weight 13mm Tapered Aluminum Ball-Race Rollers (Ringless) x2 *New form with holes.
• 2x8mm screws x2
• Curler Spacers x4
• Constructed-in 520 ball bearings.
• Saves roughly 20% weight in comparison with Merchandise 95497.
• Merchandise 95497: 0.97g / Merchandise 95683: 0.77g (Weight is per one curler with built-in 520 ball bearing.)
• Appropriate with Mini 4WD PRO and Mini 4WD vehicles.
95684 Multi Curler Setting Keep HG Carbon (3mm) Asia Problem
To commemorate the Tamiya Mini 4WD Asia Problem (TMAC), this limited-edition product takes our widespread HG Carbon Multi Curler Setting Keep (3mm) (Merchandise 95258) and provides inexperienced coloration Asia Problem graphics to rejoice the event.
• HG Carbon Multi Curler Setting Keep (3mm) Asia Problem (Inexperienced Logos) x1.
• The light-weight carbon fiber keep has elevated rigidity.
• This keep options inexperienced Asia Problem and Tamiya brand print for a particular look. (Don’t use cleaners as they’ll injury the printed space.)
• Attachment holes are supplied for 9mm, 13mm and 19mm rollers, providing loads of setup choices! (Use with individually offered choice rollers.)
• Might be hooked up at each entrance and rear.
• Contains screws, nuts and washers for attachment.
• Appropriate with all Mini 4WD and Mini 4WD PRO vehicles. (Please be aware that some chassis and our bodies could require modification.)
95685 HG Carbon Rear Keep 3mm Asia Problem Inexperienced Brand
To commemorate the Tamiya Mini 4WD Asia Problem (TMAC), this limited-edition product takes our widespread HG Carbon Rear Keep (3mm) (Merchandise 95259) and provides inexperienced coloration Asia Problem graphics to rejoice the event.
• HG Carbon Rear Keep (3mm) Asia Problem (Inexperienced Logos) x1
• The light-weight carbon fiber keep has elevated rigidity.
• This keep options inexperienced Asia Problem and Tamiya brand print for a particular look. (Don’t use cleaners as they’ll injury the printed space.)
• Attachment holes are supplied for 13mm, and 19mm rollers, providing loads of setup choices! (Use with individually offered choice rollers.)
• Contains screws, nuts and washers for attachment.
• Appropriate with MA, MS, VZ, FM-A, AR, VS, Tremendous-II, Tremendous X, Tremendous XX and Tremendous TZ-X chassis vehicles. (Please be aware that some chassis and our bodies could require modification.)
95686 Lp Tire/A-Spoke Wheel Set Sm Dia/Black Plated Asia Problem
This limited-edition product commemorates the Tamiya Mini 4WD Asia Problem (TMAC). The set contains black-plated A-spoke wheels for a classy look, and small diameter low-profile exhausting tires.
• Small Dia. Low-Profile Laborious Tires x4
• Black Plated A-Spoke Wheels x4
• Black plated A-spoke wheels are paired with inexperienced elastomer, exhausting low-profile tires.
• The tires have “TAMIYA MINI 4WD / ASIA CHALLENGE / TMAC” lettering print in white. (Don’t use cleaners as they’ll injury the printed space.)
• Appropriate with Mini 4WD and Mini 4WD PRO vehicles with small diameter tires. (Please be aware that some our bodies could require modification.)
95687 Hyper Sprint Motor Professional Asia Problem
This limited-edition launch of the double-shaft Hyper-Sprint Motor PRO (Merchandise 15375) has a label and packaging commemorating the Tamiya Mini 4WD Asia Problem (TMAC). It’s a balanced, high-performance motor for superior Mini 4WD PRO racers. It’s at residence on a spread of programs, from twisting and turning technical ones to straight-dominated pace layouts.
• This motor will increase automobile pace and requires a complicated machine setup.
• Silver carbon combination materials brushes guarantee each electrical effectivity and sturdiness.
• The motor label is gold and black, and the end-bell crimson.
• Enter voltage: 2.4-3.0V.
• Torque at really helpful load: 1.4-1.9mN-m.
• RPM: 17,200-21,200.
• Present consumption: 1.6-3.0A.
• Appropriate with Mini 4WD PRO vehicles solely.
• Use with 8T pinion gears (offered individually).
95688 HG Alum Ball-Race Rollers 19mm Ringless/Inexperienced Asia Problem
This limited-edition product relies upon our widespread HG 19 mm Aluminum Ball-
Race Rollers (Ringless) (Merchandise 15464). It commemorates the Tamiya Mini 4WD Asia Problem (TMAC) which options cool inexperienced graphics.
• Aluminum rollers with built-in 520 ball bearings x2
• 2x8mm screws x2
• Spacers x4
• These aluminum rollers have “MINI 4WD ASIA CHALLENGE” lettering and Tamiya brand print on a inexperienced background. (Don’t use cleaners as they’ll injury the printed space.)
• Appropriate with Mini 4WD and Mini 4WD PRO vehicles. (Please be aware that some our bodies could require modification.)
