RC10 1989 Stealth, Entrance Bumper, 3D Print – Black
Half# 5307
The RC10 1989 Stealth automobile is a good piece, nevertheless, we seen it was lacking one thing, a entrance bumper. The JConcepts designers created and printed a brand new direct bolt-on merchandise to present this piece of RC historical past the correct entrance safety it requires. Examined in the course of the Staff Related Classic Championships in Las Vegas, Nevada, Ryan Maifield put it by way of the paces and the merchandise handed with flying colours. Designed to suit the car, chassis, and entrance bulkhead, the entrance bumper requires 4-40 {hardware} (not included).
The SLS printed half in PA-12 materials has proven nice sturdiness and is analogous in efficiency and longevity to injection molded objects. Though, no ensures exist with 3D printing, we imagine this half passes the take a look at, stays inside an affordable finances, and permits the person to focus on constructing, and racing on the highest degree.
Options:
• Real JConcepts design, match, and end
• Examined by Ryan Maifield
• Sturdy 3D printing, SLS PA-12 materials
• Locates to inventory chassis, and entrance bulkhead
• Requires 4-40 {hardware} (not included)
RC10 1989 Stealth, Battery Field & Digital Tray, 3D Print – Black
Half# 5309
The RC10 1989 Stealth automobile is a good piece, nevertheless, there was a gap to supply a brand new battery mount location and add an electronics plate. The JConcepts designers created and printed a brand new direct bolt-on merchandise to present this piece of RC historical past a recent half able to a number of duties. Examined in the course of the Staff Related Classic Championships in Las Vegas, Nevada, Ryan Maifield put it by way of the paces and the merchandise handed with flying colours. Designed to suit the inventory chassis and requires 4-40 {hardware} (not included).
The battery compartment is designed to suit a shorty 2s lipo battery inserting it in a ahead place. The rear of the 3D printed merchandise is reserved for pace management mounting space with tunnel entry to maintain wiring clear and easy to receiver. This merchandise is greatest used when mixed with JConcepts #5306 solid carbon battery strap (not included). The SLS printed half in PA-12 materials has proven nice sturdiness and is analogous in efficiency and longevity to injection molded objects. Though, no ensures exist with 3D printing, we imagine this half passes the take a look at, stays inside an affordable finances, and permits the person to focus on constructing, and racing on the highest degree.
Options:
• Real JConcepts design, match, and end
• Twin objective battery field & electronics tray
• Examined by Ryan Maifield
• Sturdy 3D printing, SLS PA-12 materials
• Locates to inventory chassis
• Requires 4-40 {hardware} (not included)
RC10 1989 Stealth, Aluminum Servo Mount Bracket – Black
Half# 5311-2
Setting the trim on any RC automobile is essential however maybe much more crucial is for the trim to stay constant all through a race. JConcepts introduces the servo mount bracket for the RC10 1989 Stealth automobile. Constructed of light-weight aluminum, the servo mount brace has been a staple for racing automobiles going again to 2015. The easy and smooth design with efficiency and monitoring benefits have spoken volumes all through the years on the racetrack.
The mount matches comfortable contained in the chassis servo mounting space growing the assist whereas the two screw mounting areas are beefy in design and zeroed in for a direct mount to the chassis. The brace has areas on all sides for set screws to assist align and preserve servo place throughout racing circumstances, crashes, and laborious hits. The set screws are supposed to the touch off towards the servo case and supply further assist retaining the servo within the supposed place which helps preserve constant steering trim.
The servo mount brace may be put in with none modifications or further gear within the RC10 1989 Stealth automobile. It’s constructed to permit room for forthcoming #5301 aluminum steering bellcrank meeting and it really works along with newly launched #5314, #5315 JConcepts 14mm clamping servo horn. When all these things are used collectively, the steering system of the car turns into an unbelievable enchancment over inventory parts, has a super alignment between parts, and maximizes steering throw in every course.
Examined by Ryan Maifield in the course of the Staff Related Classic Championship, the servo mount bracket appeared good, match good, and put in simply. With a smooth wrap-around design, luster of aluminum, and etched Staff JConcepts brand, the servo mount bracket provides consistency, efficiency tune-ability with aesthetic enchantment. The brand new merchandise is designed to make use of 4-40 {hardware} provided by the person both off the inventory mannequin or from private spare components (not included). JConcepts is, World Confirmed Innovation and Design.
Set up notes –
To put in, utterly take away servo from car and take away commonplace mounts. With the servo horn already within the appropriate place, align plastic shims or with out as beforehand used on the servo. Set up brace to every aspect and loosely fasten manufacturing unit mounting screws with washers into the 4 areas and comfortable them. Now, middle the servo between the brace and set up the set screws on all sides, use a lightweight quantity of thread locking compound (#8136) RM2 thread lock adhesive and comfortable them to the touch off and maintain the servo in place.
Utterly clamp the 4 mounting screws on the entrance aspect to lock servo place. Bear in mind to all the time use a lightweight quantity of thread locking compound when securing metal screws into aluminum. Reinstall the servo to car and trim out and verify EPA changes to finish meeting.
Options:
• JConcepts unique design and performance
• Machined aluminum, wrap-around idea
• Examined by Ryan Maifield
• Set screw-controlled centering characteristic
• Mounts straight to straightforward chassis areas
• Accessible in black anodized coloration
• Aesthetic jewellery
RC10 1989 Stealth, Physique Mount Pad, 3D Print, 2pc – Black
Half# 5312
The RC10 1989 Stealth automobile is a good piece, nevertheless, we seen room for a clear set up of physique mount pads on the aspect of the chassis. The JConcepts designers created and printed a brand new direct bolt-on merchandise to present this piece of RC historical past the correct location for hook and loop tape fastening. Examined in the course of the Staff Related Classic Championships in Las Vegas, Nevada, Ryan Maifield put it by way of the paces and the merchandise handed with flying colours. Designed to suit the chassis; whereas using current holes the physique mount pads require 4-40 {hardware} (not included).
The SLS printed half in PA-12 materials has proven nice sturdiness and is analogous in efficiency and longevity to injection molded objects. Though, no ensures exist with 3D printing, we imagine this half passes the take a look at, stays inside an affordable finances, and permits the person to focus on constructing, and racing on the highest degree.
Options:
• Real JConcepts design, match, and end
• Examined by Ryan Maifield
• Sturdy 3D printing, SLS PA-12 materials
• Locates to inventory chassis gap areas
• Requires 4-40 {hardware} (not included)
RC10 1989 Stealth, Metal Entrance Weight, 28gm – Black
Half# 5313
One of many fashionable equipment for classic automobiles is chassis weight. Including weight to the entrance can help in constant dealing with increased grip dust tracks, and on carpet or astroturf circumstances. The JConcepts designers added a entrance weight which bolts on to the entrance of the RC10 1989 Stealth automobile. It’s simply added or eliminated through the use of 4-40 locknuts (not included) on the highest through the use of (not included) lengthy FHCS screws from the underside of the car.
The metal entrance bulkhead weighs 28.3gm and is precision machined in metal and has a black oxide end. The brand new merchandise is laser etched with JC brand and weight listed for fast reference and authenticity.
Options:
• Real JConcepts design, match, and end
• Examined by Ryan Maifield
• Sturdy metal materials with black oxide coating
• Locates to inventory chassis gap and bulkhead areas
• Requires 4-40 {hardware} (not included)
RC10 1989 Stealth, 14mm Servo Horn, 23T – Black
Half# 5314-2
One of many crucial factors of racing comes from the steering servo and correct servo horn. The horn transfers all of the torque from the servo to the steering bell cranks and this piece must be created with precision and sturdiness. The JConcepts 14mm clamping servo horn created for the 23T depend has all the required geometry to suit an unlimited assortment of automobiles. Nevertheless, this horn is specifically designed for the RC10 1989 Stealth automobile to suit below the highest deck and supply correct angle and geometry.
The broad base of the horn tapers to the connection space the place the steering takes place. The boss on prime surrounds the ball-end and offers a hefty floor for steering course. Small ribs have been added on the edges to assist strengthen the unit in a twisting trend and a deep pocket hides the 3mm commonplace mounting screw. The horn has laser etching with JC and the tooth depend for high-end seems to be and authenticity.
Accessible in black anodizing, the 14mm clamping servo horn is nice for automobiles such because the RC10 1989 Stealth automobile and others which require the identical top. This servo horn is the right complement to forthcoming JConcepts #5301 aluminum steering bellcranks, and already out there #5311 servo mount bracket. Examined by Ryan Maifield in the course of the Staff Related Classic Championships, the servo horn proved to be sturdy and proper geometry for the Stealth automobile.
Options:
• Precision machined aluminum
• 23T depend, 14mm fashionable top
• Clamping type
• Light-weight / sturdy design
• Chamfer spotlight edging
• Accessible in black anodized coloration
• Aesthetic, race- prepared jewellery
RC10 1989 Stealth, 14mm Servo Horn, 25T – Black
Half# 5315-2
One of many crucial factors of racing comes from the steering servo and correct servo horn. The horn transfers all of the torque from the servo to the steering bell cranks and this piece must be created with precision and sturdiness. The JConcepts 14mm clamping servo horn created for the 25T depend has all the required geometry to suit an unlimited assortment of automobiles. Nevertheless, this horn is specifically designed for the RC10 1989 Stealth automobile to suit below the highest deck and supply correct angle and geometry.
The broad base of the horn tapers to the connection space the place the steering takes place. The boss on prime surrounds the ball-end and offers a hefty floor for steering course. Small ribs have been added on the edges to assist strengthen the unit in a twisting trend and a deep pocket hides the 3mm commonplace mounting screw. The horn has laser etching with JC and the tooth depend for high-end seems to be and authenticity.
Accessible in black anodizing, the 14mm clamping servo horn is nice for automobiles such because the RC10 1989 Stealth automobile and others which require the identical top. This servo horn is the right complement to forthcoming JConcepts #5301 aluminum steering bellcranks, and already out there #5311 servo mount bracket. Examined by Ryan Maifield in the course of the Staff Related Classic Championships, the servo horn proved to be sturdy and proper geometry for the Stealth automobile.
Options:
• Precision machined aluminum
• 25T depend, 14mm fashionable top
• Clamping type
• Light-weight / sturdy design
• Chamfer spotlight edging
• Accessible in black anodized coloration
• Aesthetic, race- prepared jewellery
JConcepts – RC10 1989 Stealth, entrance bumper, 3D print – black
Half# 5307
UPC Code – 845937040329
Retail worth – $17.00
Map worth – $14.45
(Matches – RC10 1989 Stealth automobile)
JConcepts – RC10 1989 Stealth, battery field & digital tray, 3D print – black
Half# 5309
UPC Code – 845937040336
Retail worth – $42.00
Map worth – $35.70
(Matches – RC10 1989 Stealth automobile)
JConcepts – RC10 1989 Stealth, aluminum servo mount bracket – black
Half# 5311-2
UPC Code – 845937040244
Retail worth – $25.00
Map worth – $21.25
(Matches – RC10 1989 Stealth automobile)
JConcepts – RC10 1989 Stealth, physique mount pad, 3D print, 2pc – black
Half# 5312
UPC Code – 845937040343
Retail worth – $17.00
Map worth – $14.45
(Matches – RC10 1989 Stealth automobile)
JConcepts – RC10 1989 Stealth, metal entrance weight, 28gm – black
Half# 5313
UPC Code – 845937040251
Retail worth – $20.00
Map worth – $17.00
(Matches – RC10 1989 Stealth automobile)
JConcepts – RC10 1989 Stealth, 14mm servo horn, 23T – black
Half# 5314-2
UPC Code – 845937040268
Retail worth – $20.00
Map worth – $17.00
(Matches – RC10 1989 Stealth automobile)
JConcepts – RC10 1989 Stealth, 14mm servo horn, 25T – black
Half# 5315-2
UPC Code – 845937040275
Retail worth – $20.00
Map worth – $17.00
(Matches – RC10 1989 Stealth automobile)
