As soon as I’ve accomplished the arduous activity of poring over our statistics to compile our listing of the yr’s hottest {custom} bikes, I’ve the much more onerous activity of choosing my private favorites. Given the caliber of the {custom} builders that grace these pages, it’s a tall order.
Every year’s routine is similar, beginning with a ‘brief’ listing of 30-plus bikes. As soon as that’s trimmed all the way down to a extra palatable dimension, I eradicate any bikes which have already positioned in our ranked High 10, within the curiosity of equity. The remaining candidates are sifted to compile my closing choice—which is listed alphabetically, by the builder or workshop’s identify.
All the bikes on this listing share one trait: they’ve been caught in my head all yr, taking part in on repeat like mechanical earworms. Get pleasure from, and remember to set me straight within the feedback if this choice isn’t to your style.
Triumph T140 by 46Works As a beaming proprietor of a contemporary Triumph Bonneville, I’ve a weak point for classic Triumphs carried out up the precise means. And it doesn’t get a lot better than this 1976 Triumph T140 from the king of Euro-style restomods, Shiro Nakajima at 46Works.
A giant a part of this bike’s attract comes from the distinctive transient that Nakajima-san was given. His buyer needed a motorbike that might compete within the Japanese Legend of Traditional observe racing sequence, however with visible inspiration from Steve McQueen’s iconic ‘955’ TR6 desert racer. Constructing a observe bike with desert sled chops seems like sticking a sq. peg in a spherical gap—however Shiro pulled it off spectacularly.
Beginning with nothing greater than a body, swingarm, and engine, Shiro tapped into his appreciable expertise racing and constructing traditional bikes to deliver the T140 as much as spec. The engine was rebuilt by Gladstone in Shizuoka, with upgrades to the pistons, camshafts, and head, a belt drive conversion, a brand new transmission, and contemporary Keihin CR carbs. In the meantime, Shiro strengthened the body, including Yamaha forks, a {custom} steering stem and yokes, new shocks, higher brakes, and 18” wheels.
Up prime you’ll discover a replica Triumph gasoline tank, a home made Bates-style three-quarter seat, and a kinked subframe. The one-off components are too quite a few to listing, however there’s one notable spotlight; a sand-bent titanium exhaust system, which has develop into a trademark of Shiro’s work. [More]
Honda Africa Twin by Auto Fabrica Journey bike design goes by means of an attention-grabbing section. Some manufacturers are content material to stay to their tried and true formulation, some are desperately attempting to reinvent the wheel, some pull affect from the rally racing scene, and others look to the previous to create dirt-worthy fashionable classics. However this practice Honda Africa Twin from the Muharemi brothers at Auto Fabrica cuts its personal path.
It’s based mostly on a completely fashionable Honda CRF1100 Africa Twin, stacked with all of the elec-trickery you possibly can think about. Auto Fabrica left the Africa Twin’s gizmos intact, however there’s little semblance of the unique design left.
The bike now wears custom-made aluminum tank covers over a hidden reservoir, including a half-liter to the general capability. Mixed with a chunky saddle, aluminum facet panels, and an aluminum rear fender that captures the look of traditional enduro plastics, the Africa Twin sports activities a chunky silhouette that’s harking back to 80s off-road competitors bikes. Nearer inspection reveals a handful of trick particulars—like the way in which Auto Fabrica relocated the OEM TFT show to a housing atop the tank.
Taking issues a step additional, the fellows upgraded the suspension with Öhlins components, put in Brembo brake calipers at each ends, and added a full titanium exhaust system. A crisp white and crimson livery provides the entire thing a manufacturing facility prototype really feel. [More]
Twin-engine Yamaha RXZ by FNG Works Two Yamaha RXZ 135 engines melded into one, a bespoke chassis, and a dedication to visible steadiness that borders on neurotic are simply a few of the causes that Irwann Cheng deserves a spot on this listing. The truth that he created this extremely imaginative machine on a shoestring price range makes it that rather more spectacular.
The construct was conceived years in the past when Irwann visited the fabled Mooneyes present for the primary time. The chance lastly arose when the Malaysian Artwork of Pace present hosted a build-off with a killer prize: a ticket to Mooneyes. Irwann went all-in.
Working beneath the banner of FNG Works, Irwann constructed his ‘Twinboss’ Yamaha by splitting the circumstances of two RXZ motors and welding them collectively. On the within, the 2 crankshafts had been modified after which coupled. A lot of the engine internals are new.
On the skin, Irwann constructed a monocoque physique and a tubular body, and drilled mounting plates that cradle the engine whereas performing as a swingarm. Parallel traces and Fibonacci-inspired ratios abound, and whereas the Twinboss options polished sections and a deep paint job, it nonetheless has a distinctly handmade aesthetic. And sure, Irwann made it to Mooneyes with the bike—and bagged a few awards within the course of. [More]
Suzuki GSX-R1100 by HAXCH Moto The {custom} retro sportbike scene continues to be pretty area of interest, nevertheless it constantly produces bikes that wow us. Main the cost are builders like Marc Bell—higher often called HAXCH Moto. Marc not solely loves 80s sportbikes, however he is aware of simply how one can tweak ’em too.
This restomodded 1988 Suzuki GSX-R1100 Slabside is one in every of Marc’s greatest builds but. Its operating gear has been upgraded with GSX-R750 SRAD forks with Maxton internals, a Maxton rear shock, Dymag wheels, and Brembo M4 entrance brake calipers. Its rebuilt engine makes use of a Dynatek Dyna 2000 ignition, Mikuni RS38 flatslide carbs, and a Yoshimura exhaust.
The bodywork has a period-correct really feel to it, nevertheless it’s largely {custom} stuff. Marc began with an aftermarket fiberglass fairing, which he modified to deal with a pair of LED headlights. A hand-crafted aluminum tailpiece adorns the rear, mounted on a custom-made subframe.
As we’ve come to anticipate from HAXCH, the Slabside’s livery is to die for. It makes use of the Gixxer’s unique colour palette, however remixes it to create a recent vibe that also seems to be prefer it may have jumped off the pages of a late-80s Suzuki brochure. [More]
Royal Enfield Shotgun 650 by ICON Motosports Portland’s best handled us to a few imply {custom} machines this yr, nevertheless it was this unapologetic Royal Enfield Shotgun 650 that demanded probably the most consideration. It was commissioned by Royal Enfield’s head workplace—who needed to have identified that ICON Motosports would promptly ditch the Shotgun 650’s bobber styling for one thing rowdier.
Half café racer, half drag bike, ICON’s {custom} Royal Enfield Shotgun 650 showcases the store’s unhinged creativeness. They redesigned the rear half of the body, massaged two Kawasaki Ninja 650 swingarms into one unit, and propped it up on Twin Nitron shocks. The forks are from a Ninja ZX-10R, and the wheels are classic 16” Astralite race numbers.
The entrance fairing is an Air Tech Yamaha FZ750 half and the rear hump got here from a Buell S2 Thunderbolt; each underwent intensive surgical procedure. The crew additionally added a Yamaha RD400 gasoline tank, retrofitted with an endurance-style filler neck and an in-board gasoline pump. Different tweaks embrace {custom} fork guards, a brand new stomach pan, 3D-printed aero wings, and fairing scoops that had been grafted on from one other donor fairing.
The bodywork is completed in an all-American colour scheme, full with sponsor graphics and outstanding Royal Enfield branding. From the sq. headlight to the under-seat exhaust system and mesh-covered muffler, this maniacal ICON particular is dripping with superior particulars. [More]
Harley-Davidson Shovelhead by Infinity Inc. This lithe Harley Shovelhead from Masumi Tsuchino at Infinity Inc. is spectacular sufficient from a distance. However nearer inspection reveals a smorgasbord of distinctive particulars, all packed along with the form of precision that might make a seasoned Tetris participant blush.
What units Tsuchino-san’s Shovelhead aside is the way in which he’s targeted on the left-hand facet of the bike. There, you’ll discover the bike’s open major, hand-shifter, {custom} oil tank, and even its bespoke twin exhaust system. Swap to the precise, and all that’s left is the bike’s distinctive Shovelhead motor and its kick-start lever.
As you’d anticipate, little or no of this otherworldly Harley is inventory Shovelhead fare. The entrance finish is a duplicate Harley VL springer setup, nevertheless it’s been narrowed to swimsuit the construct’s 21F/19R wheelset. As for the precise body, that’s from a classic Panhead.
Perched atop it’s a handmade aluminum gasoline tank, with a contemporary Motogadget speedo embedded simply aft of the gasoline cap. It’s matched to a Messinger bobber seat and a repurposed Sportster rear fender. Masumi’s craftsmanship is matched by a refined board track-inspired livery, complemented by components which have both been polished, or anodized and sand-blasted to create a particular matte end. [More]
BMW K100 by Motocrew For somebody who solely customizes bikes as a part-time gig, Chris Scholtka is fairly rattling good at it. The person behind the Motocrew moniker has a knack for constructing razor-sharp café racers—even when he’s working with a donor as awkward because the venerable 1984 BMW K100.
Chris already had just a few {custom} Ok-series builds beneath his belt when the fee for this one rolled in, so he determined to construct on his expertise and kick issues up a notch. This Ok rolls on a Ducati Panigale entrance finish, a Nineteen Nineties BMW K1100 swingarm, and a 2000s K1200S rear wheel, giving it a completely fashionable really feel. A completely adjustable rear shock from Touratech props up the rear.
Shifting to the bodywork, Chris matched the K100’s OEM gasoline tank to a pair of handmade PVC plastic fairings, creating a pointy line and masking up the ugly indentations that sometimes disguise behind the inventory fairings. A {custom} tail hump sits out again, supported by a {custom} subframe and completed off with an built-in taillight.
Standout items embrace a repurposed Husqvarna headlight, a cockpit loaded with high-end Motogadget goodies, and a rowdy four-into-one exhaust system. The livery is an effortlessly cool play on the long-lasting John Participant Particular colours. The whole lot simply matches—proper all the way down to the Heidenau K73 tires, which Chris picked as a result of they remind him of F1 rain tires. [More]
Buell X-1 Lightning by Mule Bikes It’s no accident that Richard ‘Mule‘ Pollock has blasted onto each of our annual High 10 lists this yr. Just like the Sportster flat tracker that made our preliminary High 10, this bike was constructed to abide by the foundations of the American Grand Nationwide Hooligan Championship. However this time round, Mule pushed the regulatory envelope so far as humanly doable.
Primarily based on a Buell X-1 Lightning, this purposeful flat tracker employs each trick the American bike builder is aware of. The mods embrace a rubber- to rigid-mount engine conversion with full adjustability of the motor placement, a chromoly swingarm, and a bolt-on titanium higher shock mount that connects to a Penske shock.
The forks are Yamaha R6 items, and the 19” wheels are a mixture of Durelle Racing hubs, Solar rims, and stainless-steel spokes. The rear wheel wears a Beringer brake and employs an inner spud, that lets Mule flip the wheel between races to make sure even tire put on. An entire bunch of engine upgrades lurk behind the circumstances, whereas on the skin, a really trick mod has moved the clutch cable attachment greater up, to protect it in case of a crash.
The bodywork is as skinny because it will get, with a home made aluminum gasoline tank up entrance and a fiberglass tail part on the again. The whole lot that may very well be tweaked has been—proper all the way down to the ignition timing cowl, which sports activities a particular Mule modification for extra correct changes. [More]
Yamaha XS650 by Goal Constructed Moto The Yamaha XS650 stays a darling of the {custom} scene, however this XS from The Gold Coast’s Goal Constructed Moto is a minimize above. Store boss Tom Gilroy’s aim was perfection—which is why it took PBM 18 months to finish the challenge.
As soon as the bike was stripped, PBM’s first job was to tweak the steering neck angle and fabricate a inflexible rear part. A traditional banana tank was sourced for the Yamaha, nevertheless it didn’t play properly with the body’s spine—in order that was modified too. 39 mm Sportster forks had been added up entrance, with 21F/19R wheels from Jonich creating the right stance.
The actual mastery right here lies within the XS650’s subtler particulars. Quite a bit went into retaining the wheels as slender as doable—like convincing Jonich to construct custom-width hubs, and piecing collectively a bespoke braking system. Peak beneath the saddle, and also you’ll additionally spot a extremely creative seat ‘spring.’
Because of a hydraulic foot clutch and a jockey shifter, there’s little or no to litter the repurposed mountain bike bars (and bar clamp). Ending touches embrace suitably lengthy exhausts, a chic sissy bar, and tidy LED lighting from PBM’s personal components catalog. Wrapped in a timeless blue and silver colour scheme, this XS650 chopper is flawless. [More]
Royal Enfield Shotgun 650 by Sureshot The truth that two Royal Enfield Shotgun 650 customs have landed on this listing is both a testomony to the bike’s versatility—or to the zeal with which Royal Enfield has been pushing bikes into the {custom} scene. Both means, this jaw-dropping Shotgun 650 from Sureshot’s Takuya Aikawa proves how a lot could be achieved with Royal Enfield’s mild-mannered 650 twin.
As implied by his store’s identify, Aikawa-san by no means misses. He calls this construct a ‘compact efficiency chopper,’ however there’s a lot {custom} work packed into it, that it’s not possible to categorise.
The body is usually new, with a gnarly aluminum swingarm linked to a RacingBros shock through a fancy set of linkages. The shock stands out by means of a cutout within the seat, disappearing right into a channel built-in into the first gasoline tank. The cockpit wears custom-made handlebars that mount to aluminum clamps in entrance of the highest yoke, fitted with the naked minimal controls.
A giant-bore package from S&S Cycle bumps the Shotgun 650’s twin-cylinder motor as much as 865 cubic centimeters, whereas twin S&S mufflers on {custom} headers add an acceptable soundtrack. From the one-off wheels and inboard entrance brake to the even handed colour scheme and purposeful stance, Sureshot’s Royal Enfield is pixel-perfect.
If we did rank the bikes on this listing, this one would take the gold. [More]
EDITOR’S NOTE Sadly, however inevitably, a handful of top-notch {custom} builds narrowly miss the minimize every year. The runners-up embrace BCR’s reimagined Ducati MHR Mille [above], Dubstyle’s root beer-colored Yamaha RD400, Powerbrick’s futuristic BMW K1100RS café racer, and MotoRRetro’s Franken-Beemer [below]. Lucas Worthing’s Ducati 1198 SportClassic hybrid [bottom] was proper up there too.
Builds that made the listing, however had already ranked in our major High 10, embrace Cherry’s Firm’s sidecar-equipped Royal Enfield, Frontwheel’s charming Honda Shadow, MotoRelic’s manic mini-bike, and our bike of the yr, Powerbrick’s Harley-Davidson Pan America.
My deepest gratitude goes out to everybody who makes Bike EXIF tick; {custom} builders, photographers, writers, advertisers, our hard-working crew, and also you, our readers. Joyful New 12 months, and see you once more in just a few days, once we kick 2025 off with a contemporary machine from our good friend Winston Yeh at Tough Crafts.
